Blaster carrier bearing question

[Sturmgewehr]

Is the Blaster carrier 2 bearing or 3 bearing like the later Banshees?

 

[skoobyj]

Is the Blaster carrier 2 bearing or 3 bearing like the later Banshees?

There's 2 in there BUT There is a spacer in there that I think you could remove and add a 3rd. But I am not sure about that.

 

[jfblasterboy65]

yea the stock ones are 2 i have a rad on mine now and i think it has 3

 

[Ready2rev]

mine were a biotch to take out when i had to replace them.

 

[xjma]

heat and a properly placed punch are your friend when removing the carrier bearings. Oh, and luck.

 

[DUALSTROKE]

There are 2 bearings in the blaster carrier.Just need a Big hammer and a punch and you will be fine.Use a large socket that fits the outside of the bearing to install the new ones.While you have it apart the best thing you can do is to drill a hole in the carrier and put a grease fitting in there.That way you can always lube it and they will last much longer.Good luck