BIG problem

[JR racing78]

hey guys well i have a 2006 blaster and i put the toomey b1 racing exhaust
and im really having trouble on the carb since the gas is coming out of the exhaust i dont know if the crankcase is flooded or something or if i just need to rejet the carb.
any ideas please help thank you..:

 

[regal81455]

floats maybe sticking? you do need to rejet with the toomey though most people seem to be in 290-320 range for a stock mikuni, i had it on with a 28mm keihin and my jetting was 145, hope this helps...

 

[Oldfart1stATV]

Yup

I agree.

Also, better rich than lean. You got the airbox lid off? It should be. With a Toomey kit you get jets and needle's setting instructions. You move the needle up one clip position, increase jet size (Like Regal said 290-320, mine was at 310) and make sure everything is clean and set right.

Check the floats!!

A

 

[just lost]

i also agree with quadboy u must re jet it..im good with the motors and everything BUT the wiring..lol

 

[Darrell]

did you buy the kit or just the pipe, cause if you just bought the pipe you should try to find a jet kit! maybe?

 

[JR racing78]

did you buy the kit or just the pipe, cause if you just bought the pipe you should try to find a jet kit! maybe?

umm i bought the whole toomey kit
with the 310 jet and everything

 

[crusty4365]

sooo jet it!

its not hard just read the directions