Hi I am new here just bought a couple blasters and am rebuilding 1. So I'm trying to pick up some knowledge from this site. But I figured I would throw up my banshee build I did a few months ago.
Here is the parts list followed by pics.
Motor completely assembled by kevin at HJR
cases and juggs pc'd gloss black
4 mil crank
stock cylinder on first bore
mx hardcore port job from kevin at Herr jugs racing.
port matched cases
chariot head with custom cut domes for pump gas.
chariot reed cages with boyesen reeds
+4 timing adjustable timing plate
upgraded clutch from hjr
moded shift star
pancake bearing
30 mm carbs with pro flow adapter K&n filter no lid
billit chariot intake with built in cross over tube
pro circuit pipes
Mattoon clutch cover with lexan insert.
The frame is pc'd gloss black
+3+1 full flight arms built for the yfz 450 shocks
450 shocks pc'd flat black
all 4 hubs, front motor mounts, rotor hub, and sprocket hub pc'd dark red
G-force adjustable axle
Hiper wheels single beadlock
Kenda knarly rears and Kenda klaw fronts
Pro taper bars
ASV shorty levers red
Alba nerf bars
stock swing arm that I cut and welded a housing for round house carrier (honda style). I got the housing and carrier from JJ&A.
And I replaced as many bolts as I could with a stainless bolt kit I had laying around.
The motor fires up in 1-2 kicks no problem. It pulls hard and I love it. Kevin did a great job with it and I couldn't be happier with the motor.
Here is the parts list followed by pics.
Motor completely assembled by kevin at HJR
cases and juggs pc'd gloss black
4 mil crank
stock cylinder on first bore
mx hardcore port job from kevin at Herr jugs racing.
port matched cases
chariot head with custom cut domes for pump gas.
chariot reed cages with boyesen reeds
+4 timing adjustable timing plate
upgraded clutch from hjr
moded shift star
pancake bearing
30 mm carbs with pro flow adapter K&n filter no lid
billit chariot intake with built in cross over tube
pro circuit pipes
Mattoon clutch cover with lexan insert.
The frame is pc'd gloss black
+3+1 full flight arms built for the yfz 450 shocks
450 shocks pc'd flat black
all 4 hubs, front motor mounts, rotor hub, and sprocket hub pc'd dark red
G-force adjustable axle
Hiper wheels single beadlock
Kenda knarly rears and Kenda klaw fronts
Pro taper bars
ASV shorty levers red
Alba nerf bars
stock swing arm that I cut and welded a housing for round house carrier (honda style). I got the housing and carrier from JJ&A.
And I replaced as many bolts as I could with a stainless bolt kit I had laying around.
The motor fires up in 1-2 kicks no problem. It pulls hard and I love it. Kevin did a great job with it and I couldn't be happier with the motor.
