Im getting close to finishing my build an will be needing to order jets soon for my carb. I have a keihin PE 28mm. Elevation is about 750 ft here in Dayton Ohio. I know that the stock main jet is a 230. I know that I will have to do a plug chop but I would like to have an assortments of jets ready. I would like to know what jets I will be needing. Also what pilot should I be running, and what needle clip setting should I have. Is there anything else im missing for the PE carb?
All mods are in sig, except I wont be running an air box lid and a DIY port job (polished exhaust port, cleaned up transfers, and a little work on the intake bridge).
Im having a hard time finding jets for the PE above 230. Looks like it takes a 99101-357 size main jet and a N424-21 for the pilot jet.
All mods are in sig, except I wont be running an air box lid and a DIY port job (polished exhaust port, cleaned up transfers, and a little work on the intake bridge).
Im having a hard time finding jets for the PE above 230. Looks like it takes a 99101-357 size main jet and a N424-21 for the pilot jet.
Last edited: