I need a howto guide for installing a yz250 engine into my blaster. My motor blowed and im not sure what all i have to do. So far i know have to shave some of the swing arm an dthen i have to fab up motor mounts but here are my questions.
1. What size sprocket and chain do i need.
2. do i have to use the yz250 coil, or the blaster coil.
3. is it possible to get the lights to work.
4. What exhaust will work. I have a blaster fmf header and silencer.
5. How does the aire filter work on a 250 is it just bolted to the carb or do you hack the stock box to make it line up w/the 250 carb
If no one has made a how to I will make one while i install this but i need the information above to complete the install.
1. What size sprocket and chain do i need.
2. do i have to use the yz250 coil, or the blaster coil.
3. is it possible to get the lights to work.
4. What exhaust will work. I have a blaster fmf header and silencer.
5. How does the aire filter work on a 250 is it just bolted to the carb or do you hack the stock box to make it line up w/the 250 carb
If no one has made a how to I will make one while i install this but i need the information above to complete the install.