Advise needed on cylinder

[Antrax]

Hi guys, I have a blaster with a 1.25 oversize piston in. How many bores does this cylinder have left? Is it worth having a port job done on it or shall I get a new one first? Any help would be appreciated

 

[motoman159]

Your piston is 67.25.. You have about 4 bores left depending on damages when it blows up

 

[blasterfreek30]

even with 4 bores left, if its jetted right and airtight, 1 bore could last you a few yrs, so i would consider getting it ported, cylinders are a dime a dozen anyway

 

[Antrax]

Ok that's great guys,needed to hear that. need to start saving and get it sent off to KOR for some power, muhaaaa. (will be suporting very soon)

 

[karterphil]

Ok that's great guys,needed to hear that. need to start saving and get it sent off to KOR for some power, muhaaaa. (will be suporting very soon)

even if you do run out of bores on a ported cylinder then you could have your cylinder re-sleeved by KOR who would then port match it to your ported specification.