99 help

[dbull09]

i have a 99 blaster it has no key switch and oil mixer thing has been removedit has no front or rear lights i have a light to put on it i just dont know anything about the wiring and since someone took a short cut on painting it my wires are all the color of my frame

 

[yamaha28]

first up, punctuation! Please help some periods and commas find their way into that statement. Second, what is the question? Which wires connect to a light?

 

[blasterdemon7]

There's a Blaster manual link in my sig. Just crape the paint off the wires to see what color they are and use the manual to see where they go.

 

[dbull09]

thanks alot ill get on that tommorow it s a little dark right now

 

[piezzi]

Removing the "oil mixer" is a good thing. Just pre-mix your gas to 32:1 and make sure the little nipple on the carb is plugged and not sucking air.

 

[wwholden]

The wires that go to the front head light should have female banana plugs. Just make sure your new lighting system is 12Vs and isn't more than 50 watts.

 

[dbull09]

Thank you very much does the same concept apply to the rear as well

 

[blasterdemon7]

Thank you very much does the same concept apply to the rear as well

Yuuuuuuuuup. .

 

[dakine97]

nice bike man i like what im seeing

 

[mud runner]

green and yellow wires for the front dont know about the back

 

[Blaaster]

Blue is power, black is ground for the tail lamp.

 

[dbull09]

Thanks again for the help I got some updated pictures just need to figure out how to get them off my phone