34mm pj carb

[bcolella4]

85 91 Honda CR 125 CR125 Carburetor 34 MM Keihin PJ Carb Nice Carb Parts Bike | eBay

here is the carb that i might buy. i still have the tors box on top of the stock carb adn i have a strait air filter out of the end. i know that im going to need to buy a new throttle cable for this but does anyone know which one. can i just run a motion pro one for a blaster. and im thinking that this will be good for my blaster.

.40 over
kor port and polish
kor head mod
advanced timing roughly +4 degrees
k&n strait out of carb and outerwears
fmf normal gold series with powercore 2
boysen power reeds
weisco piston rings ect.
ngk b8es plug (normal)

and soon to come 3 mil vitos stoker after the carb. and any jetting suggestions where to start i am running a 320 main with a 35mm pilot on the stock carb in usual 70 degree weather in jersey. thanks guys awesome people on this website. u all area great help I:II:II:II:II:II:II:I

 

[Herpderplol]

I just ordered my cable (finally)

To be 100% sure its the right cable, i ordered the twist throttle one. It has the right ends, but a little extra cable, just wrap it around in throttle body and it works fine I:I

 

[bcolella4]

so ur saying that it wouldnt fit cuz im not the biggest fan of twist throttles. i couldnt just order a motion pro for a bllaster. and how much u think it would wake my blaster up with that 34mm?

 

[Herpderplol]

I ordered the wrong cable once.

I had a twist on my old one, and my brother has the twist cable on his.

I suggest ordering the twist throttle CABLE. It has the right ends to go with TORs delete.

Its a little long, but it wraps nicely inside the throttle housing

 

[bcolella4]

ok thanks im getting it a little and im not like a rookie at this stuff haha. i just havent screwed with a different carb before i know a lot of thinks abut blasters but do u have a ny pics idont mean to be a hassle but its a lil confusing

 

[bcolella4]

and your saying that it will basically slide right in like a normal cable? or wil you have to like wrapp it around a few times in the throttle housing

 

[Herpderplol]

I can get you pictures in the morning I:I

Its kinda midnight here

Mine is all torn apart, so easy pictures.

 

[bcolella4]

ok thanks a LOT lol.

 

[Herpderplol]

i have mikuni, so its a little different, but the basics are all the same i do believe.

I will show a picture of how i have mine wrapped. Works perfect on both of ours I:I

 

[bcolella4]

cool bananas lol thx a lot

 

[Herpderplol]

You will need a new boot to mount that carb to the motor


http://www.blasterforum.com/general...ure-photobucket-55659/?highlight=post+picture

 

[bcolella4]

and what do people normally use for their pj carbs with an aftermarket throttle cable. i cant imagine that everyoone does this mod right hahah

 

[bcolella4]

and im going to have to do the intake stretch for a little while cuz im short on cash

 

[Herpderplol]

How do you plan to stretch 26mm to 34mm? Its going to wreck it

 

[bcolella4]

i heard its been done? i guess its not good haha?

 

[Herpderplol]

It might be possible to get another hose to go on the ouside of stock size, but im not sure how that would work...

I say buy the carb, and wait to install until you get that boot.

Also you will need to rejet

 

[bcolella4]

yea ik about the reget i emailed ken oconnor but idk where im going to even start haha its a little overwelming. like i want to know where to atleast start with the main and pilot and then airscrew adjust from there

 

[Herpderplol]

Make a thread, or edit this one and add it. The people here are very good at getting you close to what you need I:I

 

[bcolella4]

i just gave u rep lol thx for the help how do i make it a thread

 

[Awk08]

the motion pro tors eliminator cable works with the pj 34.
ask me how i know

http://www.ebay.com/itm/MOTION-THRO...Parts_Accessories&hash=item58a3e09fa4&vxp=mtr

intake boots have been stretched to fit 34's,
i think by boiling it
the one i know of did indeed split after some time but was caught in time before a massive airleak fried the piston.
i suggest doing it correctly.....

UPP Racing Intake Manifold 34 35mm Yamaha Blaster YFS200 YFS 200 88 06 | eBay


my 34mm pj jetting @ 1800' elevation with KOR porting/head mod, uni filter in CFM box and right bend CT pipe...

48 pilot
DGH needle on middle clip position
155 main/162 from 50's - high 30's temps

alot of others start at 50 pilot/150 main for 34/35 carbs.

i'd get 45/48/50 pilots
148/150/155/162 mains
the DGH needle from here...
http://www.carbparts.com/
just call them to order

that jetting should be close and confirmed/adjusted from there......

check/adjust float height:
http://www.blasterforum.com/carburetor-138/float-heights-how-adjust-them-50565/

adjust your pilot with the airscrew setting:
http://www.blasterforum.com/carburetor-138/adjusting-your-airscrew-pilot-jet-51060/

and plug chop for main jets:
http://www.blasterforum.com/carburetor-138/how-plug-chop-53237/