+2mm Carb Boring

[tjguthrie16]

I just got a new lathe and I'm starting to do carb boring again.

Disassembly, Bore, Flow, Reassembly- $75.00
Bore, Flow- $50.00

If you want it for $50.00 you will need to take the bowl, jets and cap off so its just the carb. You have to arrange shipping. We can add shipping back to your bill also that way you don't have to bother with return shipping

 

[coreyownz]

ok how much would i have to rejet i might have to send u the carb

 

[coreyownz]

from a stock carb

 

[StormTrooper]

ya what he asked

 

[tjguthrie16]

with an aftermarket exhaust and reeds you will need to go up one jet size from stock...

 

[tjguthrie16]

280 jets should be where you need it at

 

[coreyownz]

for that id rather just buy a mikuni 30mm with thumbthrottle cable pm how much with cable to 12754

 

[REEDracing94]

what would this do for performance?

 

[Braapbraap95]

its like going from your stock jug to a 240 kit. except from a stock carb, to a bigger stock carb. this would give you more power, and probably more throttle response?

 

[REEDracing94]

it sounds like its like goin to a bigger carb

 

[Braapbraap95]

lol.....exactly.