I bought a 2003 yamaha blaster of Craigslist a couple weeks ago. It was in bad shape and the things I've replaced on it are as follows... I've rebuilt the top end, new pistons, new carb, new spark plug, new air filter, new rerds, from what I know it's all stock, entire new wiring, cdi box, stator, flywheel, regulator, I thinks thats everything. So I get a good spark and get good compression (both I've tested) but the blaster wont stay running and takes a ton of kicks to start. I've adjusted the carb from 1 turn out to 2.5 turns out and everything inbetween. I'm at a loss on what else to look in to. I'd love any advice thanks so much!!!
Last edited:
