The motor seems to be ok, just need piston and rings, cylinder is fine, and not much if no play in the crank. I am more worried about jetting and making sure this bike will run right. It has a aftermarket pipe on it and running one rad.
Liquid coold system seems to be tight with no leaks but i havent gotten to try running the bike yet. There are a bunch of wiring harnesses that are not connected to anyhting but i am assuming those are the ones for the original 200cc that came with the quad.
Just looking for all the help i can get. I am unfamiliar with the bike but am pretty handy at most small engine endevours so any input will be appreciated. Anything i need to look out for? Or things i should add/tune to help it along? Here are a few pics to give some perspective.