i just bought this blaster yesterday, got up this morning it fired right up, rode it for awhile, washed it, now it won't start. while i was riding it the engine would rev too high when i pulled the clutch in, so i adjusted the air screw and it seemed to help at the time, but that was while it was running. i just went out to ride it and it started up, but died right down. please help.
03 baster won't start.
- Thread starter VANCE
- Start date
is your TORS still hooked up? thats a common problem with blasters.
if you feel up to it you can take it off its quite easy.
http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/
if you feel up to it you can take it off its quite easy.
http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/
Also turn your air screw all the way in then back it out 1 1/2 turns
your idle screw is under your seat on top of the metal TORS box on your carb
Thats what you use to idle your blaster up and down
your idle screw is under your seat on top of the metal TORS box on your carb
Thats what you use to idle your blaster up and down
you might also have a small air leak
check all your boots and check your head (the blastes of cours)
check all your boots and check your head (the blastes of cours)
well if it stopped working after you washed you may have gotten something wet..
stator maybe or even the airfilter
stator maybe or even the airfilter
Similar threads
