diy

Hello! So I bought a Trenga Gen3 Rear Caliper setup from a fellow member (Jesse Colon) on here. I know these Gen3's have questionable braking abilities as well as a fairly unknown status on what parts were used/sourced. Let me give some background on why I decided to buy this: I used to play...

Hey Everyone, So last thursday I swapped my entire front-end for a 2004 Blaster. I picked everything up (minus the master and new rotors) for $150. Galfer Lines sure are a thing of beauty! Since I had no way to keep the line from going into the steering shaft, I had to zip-tie it loosely to...

Hello! My name is Dan, I'm from Northeastern Pennsylvania and I recently acquired an almost immaculate 1991 Blaster WITH A TITLE. This has no aftermarket parts and even has the original tires from 1991 (three digit DOT code vs. a four digit DOT code). I've wanted a Blaster since I was about...

So I recently bought a 2005 blaster with stock exhaust, and am looking to brainstorm some ideas to fit a yz85 silencer I have laying around. I don't have access to a welder, but was thinking of cutting the mid section of the restrictive silencer on the blaster and somehow fitting the two...