Search results

So as some of you know I got a junk/parts warrior. Just wondering if or what I could save for parts/upgrades on my blaster. My blaster is 94, and mostly stock. I read that the front spindles may work with a conversion kit, so I think I'll hold onto those for now, and the tires I'm gonna keep...

So I decided to start a new thread on this since my mission has changed. Got it most of the way broke down today. All thats left is to pull the crank and pistons. So far I only found 1 bad thing. The end of the crank has a key for the timing gear and it was in rough shape. Boogered the keyway up...

These are the rear rims that came on my blaster. They are testament as to how well it was treated lol. The one is fine, so if anybody needs one or thinks they wanna try n fix the bad one get ahold of me. The are 10 inch aluminum 4x115. I really don't want anything for them, pretty much just...

I decide to try a thread on this to get a little more response. I know I post too much off topic stuff lol, but this is the only forum I've ever liked and I trust your opinions. So I was gonna use existing floor furnaces in my new house, to save costs, but after my daughter burned herself today...

Alright guys, finally taking the time to get this on here and ebay. Complete minus carb, $100+shipping for any member with 200+ posts, everybody else refer to the ebay link that Ill put up as soon as I get it made. Same goes with any other parts that anybody needs off this thing. The only thing...

Ok guys so I'm gonna be getting some property soon. I was planning on just renting it as it is too small for my family of 4. I have since rethought my idea and decided to add on to the main house. Better to pay a mortgage than make rent and pay rent and pay the mortgage. Right now it is roughly...

http://www.harborfreight.com/automotive-motorcycle/tire-wheel/mini-tire-changer-61179.html

Well as some of you know I recently put an addition on my shop. Mainly for my paint, pressure washer, sprayers, and what ever else I didn't want subjected to the cold weather. I've got the inside all finished, the outside is gonna wait til spring so the boards can dry good before I put battens...

So I've looked all over trying to find the vin on this thing and can't. I wanna get a manual for specs, but I know there are some differences in the years. I've got the manual for the badger 80, but again not sure what differences there may be

Well I got both the craigslist quads home last night. Hopefully one will be for the old lady and one for my 10 yr old girl, since me and big sis already have ours. Stopped by the shop after work and got em parked and covered, where there gonna sit til I get some other things finished up. I'm not...

Are the knuckle arm (tie-rod to spindle brackets) bolts supposed to have castle nuts? I didn't have any on mine and I didn't see them on the diagrams in the manual. My bolts are coming loose though, I was gonna apply some locktite

Its what it sounds like. When I first take off at the low rpms it runs rough and doesn't have much power. It only last a few seconds and it seems to get better as it warms up. Now I'm still on break-in so nothing above 3/4 throttle. I have been cleaning my carb religiously throughout my rebuild...

I'm gonna do as much searching as I can, but I have a homeowner (I've worked for forever). Keeps having problems with his well/water system. This year he has put over 5k into it and the well guys still can't get it right. And its the second set of well guys. I told him to get rid of the first...

Since I'm finally gonna be riding, later tonight hopefully. I thought I would pose this ^^^^ question. I haven't seen an argument about this yet, but I have heard opinions going both ways elsewhere. So how do you do it and why?

So my car out of nowhere started making a kind of grinding noise a couple weeks ago. It was only when I turned left then, but now its doing it sometimes when straight. It is the worst from about 35-45mph. It sounded like it was on my side and my daughter agreed with me so when I got home I took...

I was getting everything buttoned up today and checked my front toe-in. Got that set and ran a 8' level along each side just to see how everything was lining up and something was off. I knew I had the front right so I measured from front rim to rear rim on each side and came up with about an...

So I finally got everything together, tried to get her going for heat cycles and nothing. I pulled the plug and held it against the head and pushed the kicker and nothing. My tester is on a job so I won't get that til Monday prob. Just trying to eliminate anything I did wrong. Before my rebuild...

Anyone know what it is? I was thinking maybe the clear tube trick would work, but not sure. I tried searching all over for a manual when we got it. Guess I may have to break down and buy one. When I got it about a year ago it had gas dripping from the overflow when I looked at it. Figured it was...

I didn't get much response on my rebuild thread about jetting (thanks tho tfaith), and wanted a little more input and knowledge. I've got lid removed, uni filter with outerwears cover, full fmf, premix 32:1, and Ken just bored it to 66.5, no porting or mods, just didn't have the cash :( My...

So I'm getting ready to get some of awks brakes and I asked him what I could do for a park brake when I got em. He had a few ideas, but nothing he had actually tried. So this is what I figured out. Won't get to actually try it for a few weeks, but wanted some more input and ideas. I got a 1/2...