Recent content by jakeracefox

I just had my motor rebuilt I have broke it in good and now the kick start is not grabbing any help guys?

or you could get a idle adjust screw i have an extra one from my tors removal kit if interested

i prob shoildnt do the plug chop till it broke in if i have to hold it at wot, right?

no thats not whathe told me thats what i ran before so thats what ran, i didnt break it in properly, and didnt do the right mix my bad $#!T happens i guess, thanx for the info guys this all should help out alot when i get it back on fri

what is the proper way to break one of these in i didnt know it was so technical

the guy is qualified for two stroke motors he races 2 stroke bikes, the oil was mixed 40:1 with 92 and booster it is 2 stroke marine grade penzoil mix

i dont know why or how it happend but it di i have a 02 blaster with fmf pipes other then that its stock it ran good till it died what shoul i be using for gas/oil and should i run octain boost in it or not the guy that does my work said it got hot backfired and blew out the reeds and siezed the...

nice write up plan on doing this when i get my blasty out of the shop along with ssome other mods STICKY!!!

nice write up plan on doing this when i get my blasty out of the shop along with ssome other mods STICKY!!!

well i said screw it the whole deal didnt sound right

well i know what to look for now in the cyl . the guy said he bought it that way and now he said he thinks the rings are gone since it wont idle does that sound right? but he said he want to replace the rings before sale idk i think its fishie too

im looking at buying another blaster he said it has a 240 kit and is jetted and has a dg pipe with new sprockets needs brake pads and carb adjusted he said IT WONT IDLE. so i am wondering if i should buy this or not and what the issue could be if what hes telling me is true the price is is 750...

i cant seem to find the trans bearings and seals i am doing a complete rebuild cause of a broken case and have orderd a bottom end kit with crank and rod and bearing do they come with that?

any pics ad what do you want for them clutch plates good?

i just got a almost complete motor and a parts bottom end for 100 bucks i need a stator ,clutch plates, piston and rings, and the part i really need is the clutch mechanism that goes down in the case from the top. what is that called where can i get one and how dos it get installed im new to...