Recent content by Delano

Hi, So i broke it!!!! I replaced the crank seal the one on the right, Had a difficult time removing the clutch basket without a impact tool. I broke one of the clutch basket arms. The arms " There are 10 of them, they are used for guiding the clutch assembly?????. Now my second question is will...

Hey!! Thanks for the input, 650ml is all i added "Gear Saver" and it drained the oil totally. The pipe (Breather) attached to the nipple, does the path it follow play a big role or can it lay in any position. Meaning Its lying in a downwards direction now. I will definitively replace the crank...

Hallo, guys/galz this small nipple with a breather pipe behind the cylinder is leaking alot of oil. My bike was full according to my glass window monitor. I drove about 40 km and when i returned the glass window displayed the oil level on the quarter mark. I could not see any oil leakage from...

fixed, idle screw warned out ...stripped wire ThX

Fixed, idle screw warn out.. It turned but the wire was striped.. ThX

Yes exactly ...I have to play with the throttle in order for her to stay alive. During gear changes she is fine, no high revs she runs normal....it is only when she is neutral she dies instantly no backfiring or choking sounds she just dies straight. It is exactly the same as hitting the red...

Yes it did... I:I

did the leak down test no bubbles !!!! Now i'm in trouble...

"WifesBlaster" I have got a Yamaha Manual. I have tried to adjust the idle but to know success. The choke has got no effect either. I removed the Tors without the kit clipping wires method. That was about a year ago. "Blaaster" The leak down test i will definitively give a shot. The thing is...

Sorry guys wrong category

Yamaha Blaster 200 cc, She won't idle at all. Performance wize she is a bit lazy as well. I removed the machine cleaned her up a bit. Did no adjustments to the carb or machine. Only adjusted chain slack. I replaced the piston few months back.. she was idling fine then. If i'm not mistaken the...

Yamaha Blaster 200 cc, She won't idle at all. Performance wize she is a bit lazy as well. I removed the machine cleaned her up a bit. Did no adjustments to the carb or machine. Only adjusted chain slack. I replaced the piston few months back.. she was idling fine then. If i'm not mistaken the...

Rehoboth, Namibia, Africa