Search results

Hi, So i broke it!!!! I replaced the crank seal the one on the right, Had a difficult time removing the clutch basket without a impact tool. I broke one of the clutch basket arms. The arms " There are 10 of them, they are used for guiding the clutch assembly?????. Now my second question is will...

Hey!! Thanks for the input, 650ml is all i added "Gear Saver" and it drained the oil totally. The pipe (Breather) attached to the nipple, does the path it follow play a big role or can it lay in any position. Meaning Its lying in a downwards direction now. I will definitively replace the crank...

Hallo, guys/galz this small nipple with a breather pipe behind the cylinder is leaking alot of oil. My bike was full according to my glass window monitor. I drove about 40 km and when i returned the glass window displayed the oil level on the quarter mark. I could not see any oil leakage from...

fixed, idle screw warned out ...stripped wire ThX

Fixed, idle screw warn out.. It turned but the wire was striped.. ThX

Yes exactly ...I have to play with the throttle in order for her to stay alive. During gear changes she is fine, no high revs she runs normal....it is only when she is neutral she dies instantly no backfiring or choking sounds she just dies straight. It is exactly the same as hitting the red...

Yes it did... I:I

did the leak down test no bubbles !!!! Now i'm in trouble...

"WifesBlaster" I have got a Yamaha Manual. I have tried to adjust the idle but to know success. The choke has got no effect either. I removed the Tors without the kit clipping wires method. That was about a year ago. "Blaaster" The leak down test i will definitively give a shot. The thing is...

Sorry guys wrong category

Yamaha Blaster 200 cc, She won't idle at all. Performance wize she is a bit lazy as well. I removed the machine cleaned her up a bit. Did no adjustments to the carb or machine. Only adjusted chain slack. I replaced the piston few months back.. she was idling fine then. If i'm not mistaken the...

Yamaha Blaster 200 cc, She won't idle at all. Performance wize she is a bit lazy as well. I removed the machine cleaned her up a bit. Did no adjustments to the carb or machine. Only adjusted chain slack. I replaced the piston few months back.. she was idling fine then. If i'm not mistaken the...

Rehoboth, Namibia, Africa

Will do all of the above as instructed...Do you think that the huge amounts of smoke could be related to the skipping of the above mentioned procedures

Ok thanks guys i will do all of the above and definitively do the leakage test...The air filter is brand new and fitted when i did the piston job. Whats the procedure on doing a break in??

I'm still using the "bum bottle" auto -lube system.. I have double checked everything except for the carb. Checked the plug as well. Followed all the feeding hoses none are pinched or leaking.. I just don't get the smothering part when accelerating.

The piston is proX piston i bought and the arrow on the piston points forward. By intake you mean the read valves??? Have not fiddled with the jets planning to though unless advised otherwise

Had a Major piston seize, Bored the sleeve to O'40 replaced the piston, rings and roller bearing. Before installing them i coated them with 2 stroke oil. Put everything back together. Started bike everything seemed ok. Bike idled for about 10 minutes no problems switched it off, started again...