Recent content by Blaster30

aasfasfasfasf sdfasf asfasdfdgf dgfdsgfd safasf

seems very shady trading a 465cc for a 200cc

i were low on fuel

yea i'll recheck because i promise you theirs no air leak could having the wrong main jet effect tose results

but i mean i were riding and when i stopped it idled fine with choke off this thing is confusing

if it looks better and run better than your think about it..... but before you ever trade bring tools and ask does he mind if you check the copression on the cylinders because you never knw what your getting into

Car is cleaned and im running a stock pilot jet... but i'll make sure i have the right main jet with a plug chop and eliminate all these problems by putting my TORS Elimination back on here and i'll show you guys how to have your blaster self idle with TORS Eliminator without having to put a...

oh its rides like a charm and never cuts off on me inless i stop and let go of throttle and maybe someone can help me because i dnt knw how to adjust float nore have i done it before

Mods: I'm Jetting for plug chop: TORS Elimination Oil Injection Delete 32:1 Premix Ratio Uni Air Filter w/ Lid On .010 Bore on Cylinder w/ Wiseco Piston Everything else is Stock I Live In Chicago,IL w/ Temp between 25-30 degrees right now

never mind i'll just reinstall my TORS Elimination

does anyone know

Hey guys just got done rebuilding my engine did heat cycles and ran through a tank of gas but now down to where at first my blaster wouldnt idle o its on but now that ive fuk'd around with the idle screw and made sure that the air screw is set at 1.5 turns out.... When i have the choke on it it...

Yea Im learning from this blaster

Not exactly its not difficult for me because i work n car so have a the tool i need... for the four stokes

Tell your new years Resolution!!!