Recent content by 94 Blaster

  1. 9

    If you get a minute would you check my post that i posted today on the 2 1/4 turn out on the air...

    If you get a minute would you check my post that i posted today on the 2 1/4 turn out on the air screw it's in the carb section. One response i got was to replace the pilot jet but i thought i would see what you thought your info is always very helpful. Thanks Brent
  2. 9

    Air screw 2 1/4 turns

    Ok it could probably use a new one anyway.
  3. 9

    Air screw 2 1/4 turns

    Replace it with the standard 32.5 or a dif. size?
  4. 9

    Air screw 2 1/4 turns

    Thought i would see what you guys think about this. Got my new Boysen carbon fiber super stock reeds put in and the Fmf power core two silencer and fatty pipe on , re-jet carb to 270 and the bore on the motor is .020 the air box lid is on. I did not do a plug chop yet but 2 1/4 turn out on the...
  5. 9

    Engine cutting out

    I usually let it warm up a good ten min but this thing should rev up sometimes i let it warm up a good five min anyway and it does it five min before it comes to life. As far as the health i did the rebuild last year comp is great like i said it it fresh.
  6. 9

    Engine cutting out

    Ok guys here we go. I have a 94 blaster that when i start it the bike revs fine siting and idles fine. When i take off about 1/4 throttle it bogs out like you hit a rev limiter and will not rev fully for about seven or 8 min of riding. If you let the bike warm up for ten minutes it runs ok. But...
  7. 9

    -no header flange-

    I agree i would buy the flange i think you can get those at Rocky Mountain Atv also you do not want to ruin that pipe.
  8. 9

    Power Band Question

    Ok thanks i will check that out.
  9. 9

    Power Band Question

    I agree it is suppose to be 55 deg. this weekend so i will plug chop it then and that will tell the story on the main jet i just wondered if you guys thought spacers may make the power band come in quicker or maybe any other ideas. could be like Brandoz28 said once i get it there keep it there...
  10. 9

    Power Band Question

    I got my FMF fatty on and power core 2 silencer and also put a 270 main jet in along with Boysen super stock carbon fiber reeds. It sounds amazing and i do think it opened the bike up some. Now before i get yelled at i did not do a plug chop yet it was only 36 Deg. here today i rode it about 5...
  11. 9

    best low/mid pipe

    FMF Fatty with a Power Core 2
  12. 9

    How much should my jet change for winter?

    Yep i agree if we do a little snow riding and i mean a little i have a stock warrior for that
  13. 9

    How much should my jet change for winter?

    With that explanation i hear by elect quadsrus1 president of the blaster polar bear club.
  14. 9

    My blaster wont run right ! PLEASE HELP!!

    Extremely lucky she didn't blow.
  15. 9

    is this a good deal?

    Sounds ok offer $ 1,000.00 see if he's hungry you can always go up :)