I'm trying to remove this flywheel nut on this 2002 Yamaha blaster 200 and I can't seem to find the right socket to remove it what size is the nut or what kind of socket do I need
Attachments
Last edited:
I think it's a 17mm.I'm trying to remove this flywheel nut on this 2002 Yamaha blaster 200 and I can't seem to find the right socket to remove it what size is the nut or what kind of socket do I need
watch at your own risk
someone might have replaced it with a diff nut?..not sure about that though
I think they did change the nutwatch at your own risk
someone might have replaced it with a diff nut?..not sure about that though
Crap! Look at the holes??? Is the head of the bolt holding anything in place? All you have to do is slot the hole not elephant size the hole! All he had to do is drill a hole beside the old hole the connect them. Not let a blind man go crazy with a die grinder!
The problem is taking the nut off lolthis is the only thing i could help you find.
http://www.blasterforum.com/threads/flywheel-nut-size-and-thread-pitch.42964/
perhaps take the effin nut off a buy a oem one that you know is a origional part
if you got no luck elsewheres
Or you can always use one of the motion pro clutch wrenches that has the 2 nipple thingys that stick out that go into the two holes on the flywheel..
No I mean I can't find the right size socket to take it offDo you mean that the flywheel keeps spinning and you cant get the nut off? If so sometimes a quick whack with a rubber mallet or reg hammer of the wratchet or wrench is enough to break the nut lose. Or an impact wrench always works well.. Or you can always use one of the motion pro clutch wrenches that has the 2 nipple thingys that stick out that go into the two holes on the flywheel..
With a thin wall right because a regular or impact does not fitIt's a 17mm socket.
I need to replace the stator but I'm taking it to a atv repair shop to see if the can test the stator or figure out what's wrong with iti want to see this 17mm socket lol
why are you trying to take it off??
also i have searched the part number stamped on yur flywheel with no luck
but im not even sure were you are at on the map
the part number in United States does not match yours... but yah know lol
Also I live in Wisconsini want to see this 17mm socket lol
why are you trying to take it off??
also i have searched the part number stamped on yur flywheel with no luck
but im not even sure were you are at on the map
the part number in United States does not match yours... but yah know lol
It has a little spark but I think the stator is not generating enough electricity to turn on because now that I changed the cdi box and the plug cap and the coil assembly now it has spark before it didn'tohhh so no spark
like i say that part number i cannot locate/although it has the yamaha logo stamped on it,with a part number
it does not match my searches..but im sure shop will tell you the issue