I need help with the wire set up with the engine swap can I use the blaster wire harness are do I need to use the wire harness from the yz250?
Ok but I been look for a 38 but can't find one can you point me to the right DirectionI'm starting off with 14/38 gearing.
What about 36 toothI think you can also use a banshee sprocket as well.
A 36 tooth sprocket won't fit a blaster hub. Don't think it would fit an early banshee hub either. You may have to get a Lonestar hub if you want to go that small and run honda sprockets.What about 36 tooth