I just put in a new top end, carburator, coil pack, sparkplug, and boysen power reeds on a 89 blaster. We did heat cycles and then rode it around. It was running great and never had any problems. Then a few days ago I started riding it. It only takes one kick with no problems and I start riding it but once it gets warmed up I can't go more than about 1/2 to 3/4 throttle without it bogging down. I tried the airscrew on the side of the carb but it didn't do anything. Everything else is stock and I jumped out the tors.
Is it a problem with the jetting?
Running too rich or lean?
Any help would be appreciated.
Is it a problem with the jetting?
Running too rich or lean?
Any help would be appreciated.
Last edited: