Hey all, I know you can't just tell me where I need to be jetted and have it perfect but I just need a base line of like two or three sizes to get and go by. I ordered boyeson 630 power reeds for my stock cage, & would like to pull the airbox lid as well, also thinking about a uni filter. I'm about 150 ft above sea level if that, going into winter so daily temps are average about 30F-40F. Straight stock as far as I know except for the oil Injection blockoff & a new fuel petcock due to wear on the stock one if that changes anything, I mix at 40-1 with amsoil dominator. What would you suggest I try for a main jet? I have a stock carb with stock 230 main, was thinking I should get a 240, 250 & 260, -1 for the reeds and +2 for the lid?? Maybe -2 for the reeds?? Also thinking of getting the foam uni filter, +1 or 2? Also +1 or 2 for the temp drop?, or more? As I said I have a stock cage, I will be plug chopping as well. Let me know what you think Thanks
Last edited: