I have tried plastic renew, but have found that mop n' glow works just as good and is cheaper. I have done the process where you wet send with progressively finer sand paper, buff with steel wool, then mop n' glow on various projects and it makes the plastics look like new. Just make sure you take your time with the sanding, though.
How to shine plastic?!
- Thread starter blastem
- Start date
If u have like a wax or clear coat on the plastics thhe gas is gonna ruin it. And if u have a lot of scratches on it ure better off using a light sandpaper or that renew thing.
polishing compound and a buffer is the best way. any automotive wheel cleaner. spray wax works wonders as well. turtle wax ice and lucas slick mist are my fav's.
definatly agree on turtle wax ice, i see a tiny improvement on filling in scratches but it does repel water but not so much dirt and mud, but after a good washing the ice works wonders
If ure scratches are that deep take a heat gun to it. Blow dryer would work but I used a heat gun and it melted all the scratches back in place then made them shiny. I was surprised by how good it came out
