If you still have the standrd "BLACk" colour on your motors head and it has faded-
1. Wash your moter.
2. Make sure its dry.
3. Start her up for a bit of heat on the motor.(3min).
4. Take some oil spray the kind you use to losen bolts etc, I used Q20. Then spray it on the hole Head (the area that is hard to get in where the cooling fins sit).
5. Start her up and let her run hot so it "gets soked in".
6. Whipe off all the access oil, and she looks like new...
PS it will start to smoke for a while but will stop in about a min or two.
Good luck.....
1. Wash your moter.
2. Make sure its dry.
3. Start her up for a bit of heat on the motor.(3min).
4. Take some oil spray the kind you use to losen bolts etc, I used Q20. Then spray it on the hole Head (the area that is hard to get in where the cooling fins sit).
5. Start her up and let her run hot so it "gets soked in".
6. Whipe off all the access oil, and she looks like new...
PS it will start to smoke for a while but will stop in about a min or two.
Good luck.....