couple quick questions real quick!!!

[cirame1]

well i sprung the 30 bux for an oil block off kit instead of blocking my pump. i have the case off and i removed the c clip with the white gear and a shaft that was also there. there is still a shaft in the hole i cannot remove and impretty sure it comes off b/c the block off plate wont sit flush with it there. any helps cool and also i am pulling my flywheel to advance timing and i got the cover off and the bolt on the flywheel is tuff to get off b/c it spins. wheel i got the flywheel puller and i understand u use it after the nut is off so any tips to get the nut off is appreciated. thanks

 

[BrokenBlazer]

I used one of those strap wrenches from craftsman. You can usually get them at parts stores to. They sell em as an oil filter wrench. I just held the flywheel with that and used and impact to get the nut off. But you should be able to get if off with breaker bar.

 

[cirame1]

yea good idea on the oil filter wrench but any ideason that metal shaft for the oil block off? i tried bangin it alot and it wont budge.

 

[cirame1]

i guess its the steel spacer im gonna try and pull it out again...