Hey guys and gals, just wanted to post my new project, so far so good, complete engine rebuild , new koyo bearing in bottom end, Wisaco crank, and pro lite piston, all new clips washer as well, boysan reed, uni pod, e3 plug, modified banshee carb, motion pro twist throttle, toes eliminate. and cables, moose bars, power add guards, pro taper grips, n style gripper seat, fmf fatty with turbine silancer, Alba a arms, banshee spindles with 450r duel piston calipers, +10 swingarm, maier race good, tank cover, mar clutch perch, modified wiring harness, banshee stock axle, banshee brake hub and rotor, banshee rear wheel hubs, tons there I haven't listed but will update soon thanks for looking
Project hill climber
- Thread starter xXADRENALINEXx
- Start date
Looking good and I got to tell u that's one long ass swinger lol welcome to the forum what are your other plans for this build anything special
Thanks I'm a member of banshee hq, I thought I'd try
i have have another motor in mid build right now is a 240 stroker with a 30 shot of oxide but I wanted to do some testing with the chassis before adding more power, but I have a 04 frame I detabed and and painting for this project, sprockets, tires, and little stuff here and there, all I work on, race and build is banshees and blasters, so I have just about four of each ready to be picked of parts or turned into new projects lol
Skeered to post this on BHQ ?
who in their right mind would subject anything but a straight line, sponsor built, once a year at the dunes build,
to the scrutiny of those close minded minions
Got that right !! Just razzing him a bit.who in their right mind would subject anything but a straight line, sponsor built, once a year at the dunes build,
to the scrutiny of those close minded minions
Ya if ya got less than 80 HP you're nuttin
Not at all lol there a respectful group just alittle hardcore is all lolSkeered to post this on BHQ ?
Looking good though !! No excess baggage.
the exhaust is pretty modest somewhere in the 90 db range, I liked my toomey better, but a spark arester is required for race day
Lol 80 hpGot that right !! Just razzing him a bit.
Ya if ya got less than 80 HP you're nuttin
Hi guys and gals I apologize for my absence it's been busy at the shop here's my latest modification, I replaced the plastic screen with a moose racing aluminum one, used a stock head light bezel and twined it a bit to fit, the maier race hood came with hardware to mount the nose to the stock bumper so I used it for mounting the light to the frame. It's not needed for racing but is required for riding trails here in Maine, hope you like the upgrade
