Recent content by BaBarossa

@ Kennedy Power: How many HP do you think can I reach with a 32 Mikuni flatside carb? Is every right side pipe better than my FMF? I ride only on the streets and on supermoto races.

It's not really hard. I don't know much about engines and the electric. Some parts have to be melded. The power valve isn't necessary, I ride without. The radiator is from a vfr400 and it's not to hot and not to cold. A fan isn't necessary. The water doesn't need a overflow to recover expansion...

With a little work it's more than 31 hp, look here: http://www.blasterforum.com/engine/7286-dt-blaster-dyno-36-6-hp.html

I'm not a friend from sleeves, they're not the same as a stock cylinder. I could make it same, and I've seen I can get a +6 piston also. I'll wait till the cylinder is really death, then I'll see what's to doB-).

No, it's not ported for the stroker crank! But next time when I rebuilt my cylinder, I'll probably port it with ram edm. It'll be the biggest piston with +3mm and the cylinder will be death after it:(.

I think I can reach 40 HP and more with a good right side pipe and a 34 Mikuni. But I can't spend much money for my Blaster, I must buy 2000 litres fuel oil for my house, this winter will be very cold in Germany.

and here's the dynorun:

After my mods. But my carb isn't good jetted, it's little to rich, the FMF is probably not the right exhaust for my engine and the power valve is out of order. But I'm happyI:I!!!

Today I was on a Dyno, and the result was: on the rear wheel: - 27.2HP at 9000rpm - 23.1Nm at 7540rpm - V-max 116.6km/h on the engine: - 36.7HP at 9000rpm - 29.9Nm at 7540rpm - V-max 116.6km/h

And I've never heard, read or seen about one here in Germany. I think I've the only one hereB-).

and here's a small clip:

... and a few more pics:

Last Saturday was a SM-training for Supermoto bikes here next to my home. My Blaster was the only Quad between 44 bikes:">. Some Pics out of our online-newspaper:

Can someone give me the stock weight of a oem piston??? I think they're between 190 and 200 gramm!?

Can someone give me the stock weight of a oem piston??? I think they're between 190 and 200 gram!?