Klotz Super TechniPlate VS Amsoil Dominator

which oil is best

  • Klotz Super TechniPlate

    Votes: 19 57.6%
  • Amsoil Dominator

    Votes: 6 18.2%
  • Other-Specify

    Votes: 8 24.2%

  • Total voters
    33
I've put quite a bit of money into my motor lately and I want to run the best oil I can get to protect my investment. Ive been a diehard amsoil fan for a while now but lately I have heard a few people talking about this klotz supertechniplate and how great it is. anybody here have any experience with it?
 
i run motorex smokeless 2 stroke fully sythenic oil it stops it from having carbon build up. it as a tad bit expensive.
 
klotz gives you build up amsoil dude run it in my 500cc 720 mod snowmobile as well as my 1010cc race sled which does 120 in 660 ft klotz built up and gave it bog amsoil all the way!
 
I used to run benol but when your burning about a gallon per mile of fuel not only did the benol get expensive but the smoke looked like the trails were on fire :)
Now I only run the Super techniplate. It makes a whole lot less smoke and is a couple buck cheaper to boot.
 
ive always heard that benol causes build up but i run alky, it does not affect mine at all. klots does make another pre mix for gas motors that work great, it has a red label. amsoil sucks, if you want to rebuild your motor run it because it will blow it up.
 
Don't know about amsoil premix but I do run their Super Shift Racing Transmission Fluid in my Banshee gearbox.
Best feeling clutch bar none. As for Super TechniPlate, I have been running the stuff at 40:1 for 30 years! It's a PROVEN pure synthetic with 20 % castor oil. You're not going to get much better film strength. I run this stuff in my lawn boy, my weedwacker, my chain saw, my banshee, my blaster and every dirt bike I have ever owned all the way back to my first bike, 1978 YZ250
 
klotz benol FTW!!! ive used it since day one of my fresh topend and the cylinder looks perfect crosshatches and all. im a little concerned about what to run once its cold out though, Benol drops out of suspension when its cold.
 
Klotz techniplate all the way looks great everytime i put a new ring in my blaster and its been 2 years now on the same bore about time for a new piston finally, yamalube 2-R im trying in the yz125 we shall see how nice it looks compared to the klotz techniplate.. but klotz all the way love that great smell
 
this is just what i was looking for. lol ive been running dominater with no problems for a very short time, but im switching to klotz ST soon.
 
after trying both amsoil and klotz, i swiftly switched back to my old tried and true
MAXIMA SUPER M
ran it in my '96 for almost 9 very hard years, i soldthat blasty with the stock piston and rings in it, and it still fired 1-2 kicks, everytime.

i now use the leftover klotz and amsoil to lube my chain, and as a lube when drilling steel
 
Klotz is the way to go. You don't even have to run super techniplate...Klotz makes original techniplate too. Plus Klotz oil smells great! I:I