Your kidding right!

[88blasterman]

so i picked up a 93 blaster and rebuild the top end and we relized the front end is very sloppy figured out it was the ball joints, and to buy new ball joints, you have to buy whole new friggin a arms!! does anyone have any other ideas on how to get ball joints out?

 

[Awk08]

it has been done, only once that i've seen.
it requires very carefully cutting the weld off the top retaining plate, replacing the ball joint,
if you can find a matching ball joint at an auto store, and rewelding that top retaining plate back on without ruining the ball joint
not worth the risk and effort
a-arms can be had from members here or ebay for cheap

 

[NOVIS]

you can probably find used a arms for under 50 bucks on ebay. that cheaper then a set of new ball joints would be.

 

[scotj77]

just pulled a set off mine last night if you are interested. off of an 04 and in perfect shape

 

[Awk08]

bada-bing /\ there ya go !!!!!

 

[DirtDiggler]

OR this is a great opportunity to get the sickness and just get a set of long travel extended a arms !!!!! its only $$$$$ grows on trees right!?!I:I