what jet sizes do u think

[Bblaster69]

i just ordered lrd full exhaust, vforce3 reeds, and k@n air filter. what do u think i should start my pilot and main jet at. lrd was saying 3-4 clicks down from top 32.5 pilot and 300-310 main for the exhaust. but i bought a older system with the adjustable chamber so what do yall think. stock bore. oh and im going to install my tors eliminator kit tommorow. thanks

 

[ATrain666]

start with a 320 and work down.

 

[Bblaster69]

so only mess with the main jet

 

[ATrain666]

you gotta do the needle with the main so try every needle setting and main jet. I wouldnt worry to much about the pilot jet. Do a plug chop after each run. There is a write up in this thread that tell you how to jet and tune your carb.