If i go out an by a new/ bigger carb can i just remove the brain box wires from the carb and the throttle.
TORS? W/new carb
- Thread starter Speiser15
- Start date
I think the tors will only work with a stock carb. It's cheap and easy to get the right cable and just get rid of that big piece of junk. What kind of bigger carb are you looking at?
All you should need to get is the conversion cable.
YAMAHA BLASTER 200 AFTERMARKET CARB THROTTLE CABLE | eBay
YAMAHA BLASTER 200 AFTERMARKET CARB THROTTLE CABLE | eBay
Last edited by a moderator:
If you go with a larger carb, you may need to change the reed to carb boot. You will have to modify the air filter to carb boot to fit. I know the 30mm OKO carb will fit the stock carb to reed boot but not sure about other brand 30mm carbs.
Alright well i am thinking of doing motor work now that its winter (porting, cfm airbox, vforce 3 reeds, etc.) so thats why i wanted to get a bigger 34mm carb and get everthing done and do it all at once but not sure if i should just do it one step at a time cuz i have no clue what to do with jetting. But i do not want to spend the money and do the work if im just getting a new carb anyways
Similar threads
