alright, i went to autozone and got a 12 volt led strip there were 2 in the pack, like 25 bucks,
i removed the plug on the GREEN wire coming out of the headlight, for my positive,
and the BLACK for the ground,
when u pull the BLACK plug apart there is a male and a female,take the GROUND wire from your leds and shove it through the hole in the end of the MALE connector, bend it over and re connect the male and female back together,
do the same with the GREEN wire from the headlight shoving the RED(positive) wire on the leds into the connector,
theres no need to cut any thing so its all reversible.
mount where wanted, mine r under the gas tank kinda, and presto!
if done correctly, your leds will turn on ONLY when you have your LO beams on this way u dont have to run a seperate switch.
heres what mine looks like, kinda fuzzy but TIGHT!!!
theres no need to cut any thing so its all reversible
http://i129.photobucket.com/albums/p203/chrismajcher/109_0840.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109_0839.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0870.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0860.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0850.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0890.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0880.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109_0786_00.jpg
i removed the plug on the GREEN wire coming out of the headlight, for my positive,
and the BLACK for the ground,
when u pull the BLACK plug apart there is a male and a female,take the GROUND wire from your leds and shove it through the hole in the end of the MALE connector, bend it over and re connect the male and female back together,
do the same with the GREEN wire from the headlight shoving the RED(positive) wire on the leds into the connector,
theres no need to cut any thing so its all reversible.
mount where wanted, mine r under the gas tank kinda, and presto!
if done correctly, your leds will turn on ONLY when you have your LO beams on this way u dont have to run a seperate switch.
heres what mine looks like, kinda fuzzy but TIGHT!!!
theres no need to cut any thing so its all reversible
http://i129.photobucket.com/albums/p203/chrismajcher/109_0840.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109_0839.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0870.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0860.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0850.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0890.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109b0880.jpg
http://i129.photobucket.com/albums/p203/chrismajcher/109_0786_00.jpg