What would go wrong or nad if i started my blaster without the header/expansion chamber. I got ablaster and havemt started it sense ive gottin it. Any help...
start a blaster without the expansion chamber
- Thread starter broom master 61
- Start date
I'm sure it will run just not very great. I wouldn't advise riding it. Are you anxious to start it or something?
i've started a few to eliminate a clogged pipe from the list of possibles to poor running, found a mouse nest once,
it revved clean with the pipe disconnected from the cylinder, it was almost dark and shot nice blue flame
this was only for a couple seconds to confirm the test. do not ride it or rev it for more than a few seconds as the pipe removed will create a very lean condition and fry it
it revved clean with the pipe disconnected from the cylinder, it was almost dark and shot nice blue flame
this was only for a couple seconds to confirm the test. do not ride it or rev it for more than a few seconds as the pipe removed will create a very lean condition and fry it
A second or two should do no harm, but it is a pretty pointless exercise unless you want to upset the neighbours.
