Does anyone know how to get these 2 nuts off? I can't fit a wrench or socket in there. I almost got the front left one off, but I can't even get the front right one loosened.
First off you need to clean it off before you start to disassemble it .12mm box end wrench. Studs are sticking up to far
Wrong studs?not screwed in the case far enough? Screw the one back down some and clean threads on all studs.
Power wash the whole thing before you go any further. Clean threads with wire brush, then lube them. Either get obstruction wrench, heat and bend cheap wrench, try crows foot, remove clutch cover, or cut that useless water nipple off