I took apart my rear brake to replace the pads, because they were the originals from '00. I have it back together now, and I am having trouble adjusting them. I loosened the lock nut on the parking brake and put the adjustment nut all of the way in. I loosened the adjustment nut and adjusted the cable going into the caliper counterclockwise like the manual says, then put everything except the addjustment nut on the caliper back to how it was. The pad is still rubbing on the discX(. I re-tried it again, then again but turned it the other way, and I can't get it to stop rubbing. Also, with the parking brake on, should it be possible to move the wheels by hand at all?