Hello
First post I have just recently purchased a 00 Blaster for cheap was able to get running and had out for a weekend was running great when it blew the skirt on the piston
When going over the bottom end I had noticed that I had zero oil in the bottom of case I know mixed my fuel at 32x1 makes me think my jetting is too lean ?
I have my head out getting bored to 1.5 over to 67.5mm I am also getting the head ported and polished
I am at stock idle jet and 290 main pin is set at standard I would like to not have a issue when I have back together any help would be great
First post I have just recently purchased a 00 Blaster for cheap was able to get running and had out for a weekend was running great when it blew the skirt on the piston
When going over the bottom end I had noticed that I had zero oil in the bottom of case I know mixed my fuel at 32x1 makes me think my jetting is too lean ?
I have my head out getting bored to 1.5 over to 67.5mm I am also getting the head ported and polished
I am at stock idle jet and 290 main pin is set at standard I would like to not have a issue when I have back together any help would be great