Old project coming back to life

WatchMeFly023

New Member
May 3, 2012
32
2
8
image.jpg
image.jpg
image.jpg
So I came across my blaster I tore down to nothing three years ago with hopes of rebuilding it with a better suspension and eventually some engine mods, due to funds I put it away and I'm just now pulling it back out! It's got +3 +1 a arms that I'll be running yfz450 shocks with (still looking for a good deal), putting it together with stock carrier and swing arm and a banshee axle eventually I'll get an a extended +2 swingarm and run a yfz450 rear shock.
I bought new sprockets, a chain, swingarm bearings, along with some new bars today. Eventually Id like to get some nerf bars a new bumper and do some engine modifications like a 3mm crank a high compression piston with a 4 degree timing advance and some light headwork (not looking to run racing fuel) a larger carb with an aluminum air box aftermarket reeds etc. also I'm looking for a good set of tires and rims, not picky about the rims would like 18s in the rear. Let me know what you guys think! I'll keep you updated.
 

Attachments

  • image.jpg
    image.jpg
    3.3 MB · Views: 211
  • Like
Reactions: Herpderplol