OIL

[DWall11]

How much transmission oil to add for the Blaster and how to just pre mix the oil and gas and run it straight through the tank...how do I just cut off that line?

 

[Awk08]

650 ml of trans oil.

oil injection delete
http://www.blasterforum.com/threads/how-to-install-oil-injection-block-off-kit.681/

http://www.blasterforum.com/threads/how-to-remove-oil-injection-without-a-block-off-kit.3272/


mix your fuel @ 32:1 ratio (4 ounces oil per gallon of fuel)
with a good 2 stroke oil, i prefer Maxima Super M (mix formula)

 

[DWall11]

Now I had at first fired it up with a mixed fuel with no oil in the tankle at the back...could this have maybe caused my blaster to not idle?

 

[Blaaster]

Changing from oil injection to pre mix, may require a change of jetting and re setting of the idle!

 

[Awk08]

Now I had at first fired it up with a mixed fuel with no oil in the tankle at the back...could this have maybe caused my blaster to not idle?

you must do the blockoff, cut the line from pump to carb, and plug the injection inlet on the carb.
you may have been sucking air thru the pump/line, causing a lean condition.
block it off correctly or fry your shiz !