oil on the engine next to the kick start.

[langlais23]

I know to run 32:1 for my actual gas tank on my blaster (the oil injection tank is removed), but for the oil that actually gets put into the engine next to the kick start. 21st do I use for that?

 

[dirtysquared]

Your looking for what type of gearbox oil to run?

Make sure that it doesn't have friction modifiers and its designed for wet clutches.
Everyone has their own preference. I run Belray GearSaver in my bikes.

 

[tbrooks]

A lot of people use type f trans fluid. You can use just about anything as long as it doesn't contain friction modifiers, ie approved for wet clutches

 

[Bluesman]

I also run Belray Gearsaver. It's expensive, but it's good oil.

 

[98blaster]

I also run bel-ray gear saver in all my bikes, has never given me a issue, an ive never had any premature clutch problems either

 

[speedyslyder]

650ml of oil no more no less. the bottle will say it on side,dumb a little out to another container till it says 650 then fill it up.If you get it a dealer it will be hard to go wrong,or ask them

 

[Blaaster]

The recommended oil for a Blaster transmission is Yamalube 4 engine oil, 10 w 30