M
mddyatv
Guest
I have an 89 blaster and after I rebuilt the carb I am getting no spark to the plug. I am not getting any power to the coil so I changed out the cdi box and still not getting anything. I am getting power to the cdi but nothing coming out of the orange wire that goes to the coil. I have checked and cleaned all my ground wire and still nothing. I even ran a jumper wire from the key switch and nothing. after reading some in the DIY section I figure it has to be either the TORS or the run stop swith on the handle bars. Any idea would be helpfull.
Thanks
Mddyatv
Thanks
Mddyatv
