just got in some +3 +1 a-arms for my blaster and have the warrior front disc brake setup.....promlam is the new adjustable upper and lower ball joints are 14mm on the stem where my knuckles are at 12mm.. can i drill these out to 14mm or do you know which atv knuckles i should be looking for as a replacement??
need some technical assistance
- Thread starter Blastericated
- Start date
sorry bout the pm bro, i just had someone else asking me some dumb sh*t, then wanted my phone number, i needed to see if you were for real, and your name, being new on here, didnt ring a bell
i'd contact norman420 on here and get a set of his modified blaster spindles
as seen here....................
http://www.blasterforum.com/suspension-parts-152/norman420-conversion-spindles-43259/
the spindles your trying to use, must be like the shee spindles, some guys ream them out to a tapered hole, some special reamer, but there is one avaiable, but i and others feel making that area of such a critical part, that thin weakens it more than i'd like to trust my well being to
i'd contact norman420 on here and get a set of his modified blaster spindles
as seen here....................
http://www.blasterforum.com/suspension-parts-152/norman420-conversion-spindles-43259/
the spindles your trying to use, must be like the shee spindles, some guys ream them out to a tapered hole, some special reamer, but there is one avaiable, but i and others feel making that area of such a critical part, that thin weakens it more than i'd like to trust my well being to
Similar threads
