Need help with making a 1999 Yamaha blaster faster

[vwindon]

I just bought a 1999 blaster, its a lil fast but I want it to go really fast. Is there any way I could make it fast without spending too much money. Help please

 

[samolia]

what mods do you have already if at all??
if no mods then you could start with these.
remove airbox lid and rejet, a highflow air filter, a pipe, advance the timing, theres alot of stuff you could do

 

[BlasterSPL]

Theres many topics on making it faster..Just read up in the DIY section..LOLKurt

 

[pittboss45]

The easiest way to make it faster is to run a 14/38 tooth sprocket.

 

[coreyownz]

yea i was gonna say that or run 14/40 or just buy a 14 tooth sprocket with a uni-airfilter and ull notice a little

 

[hickskateboarder]

go to the engine forum and start reading.

 

[wrench man]

The easiest way to make it faster is to run a 14/38 tooth sprocket.

That only works with them TINY! turf tires.

 

[militaryblaster]

Get an aftermarket exhaust setup, reeds, and an airfilter. There is a ton of stuff you can do but these are a few pretty cheap options if you dont already have this stuff.

 

[thefastestkidontheblock]

What is the amount you want to spend? You can get a port job with the triple exhaust ports and I heard that wakes up the blasters. also get some a nice pipe, high flow filter, reeds, carb.
Install mods in this order:
High flow filter
Exhaust
Reeds
Carb
Port work
Just remember to rejet for each mod.