Ok, so I bought an older blaster and it runs good but has a bent frame....so I found another one with a blown motor but everything else is supposed to be fine.....so I swapped the engine to the good frame, and now I got no spark...I've swapped everything....cdi, voltage regulator, coil, carb, everything from the old quad....I got spark coming out of the engine, and up to the cdi, but the orange wire coming out of the cdi going to the coil doesnt have any power...and it did yesterday on the other bike, same setup, just different frame and wiring harness, which I've gone thru and checked for broked wires as well.........doesnt make any sense....even swapped the on/off switch.....tors is still on it for now but it's disconnected.....
anyone got any ideas?
anyone got any ideas?