Left Side Crank Case or Whole Bottom End

[DeJay1206]

If you have a left side case (stator side), bottom end, or full motor let me know!

 

[DeJay1206]

You don't want to separate them, you made that quite clear.

 

[DeJay1206]

gotcha, you didn't reply in that thread, just making sure you saw it.
nothing wrong with just adding a left side, but full matching set is better, IMO
and going with a complete bottom end w/ used crank is a crap shoot at best.

the set I do have to part with is stripped bare, but did include all new bearings for it.
I have not double checked if in fact they are all there though ?
but could end up as a fully rebuilt bottom end with all new bearings eventually.

That's exactly what I need. I'm going to replace all the bearings in the bottom end anyway...I want everything to be completely brand new on this thing.

 

[Awk08]

That's exactly what I need. I'm going to replace all the bearings in the bottom end anyway...I want everything to be completely brand new on this thing.

good choice,
sounds like I do have exactly what you need
let me get it gathered up and double check what all is there.

 

[DeJay1206]

good choice,
sounds like I do have exactly what you need
let me get it gathered up and double check what all is there.

You get a chance to check it out?

 

[Awk08]

You get a chance to check it out?

I did not Dejay, I'll try to get down there tomorrow and text you pics.

 

[DeJay1206]

Haha thanks.