June 2010 BOTM Entries

[cbaber]

Entries for Blaster Of The Month (June 2010) are now open!

Please make sure you have read the following thread before creating your entry.
"Blaster Of The Month Entry Details, Rules and Requirements..."


Have a great time and GOOD LUCK!​

 

[yzrider]

Chassis | Suspension | Controls:

A Arms: stock
Swingarm: stock
Steering Stem: stock
Stabilizer: none
Axle: banshee axle
Carrier: stock
Locknut:stock-taped
Hubs F|R: stock
Bars: stock
Throttle/Clutch Lever: stock
Grips: odi lock on grips
Nerfs: motorsport- black
Bumper: JAWS
Grab Bar: stock
Front Shocks: progressive 412 (i think) series
Rear Shock: 400ex
Brake Lines:stock
Rotors F|R: stock
Rims F|R: itp front, itp beadlock rear
Tires F|R:kenda klaw 20x6-10, shredder 18x9.5-8

Body:

Frame: stock
Plastic:stock, no front fenders
Graphics|Seat Cover: none, blue gripper
Number Backgrounds:none for now
Handguards: moose foam ( not pictured)
Bar Pad: none
Fuel Tank: stock

Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam: ? i didn't know 2 strokes had a cam?
Carburetor: stock, jetted
Air Filter|Box: K&N!!!!!, stock
Pipe|Silencer: FMF, pro circut 304 factory sound
Clutch|Plates: stock, stock
Gearing F|R: 14/40
CDI|Killswitch: stock, pro armour
Cooling: good old indiana air
Other: lotsa stickers, dual pre filters on the air box, flipped front tires, painted them little things between the rims and the hub, have freeks cheap handlebar risers, trail tech endurance speedometer, cool little fuel cap vent, heel guards removed until i make some custom ones, prolly some more crap that i have forgotten about

old crappy cell phone vid, it'll have to work, oh and sorry my friend ( who is filming) is a retard

 

['blanshee'man]

A Arms: +2+1 strong arm & +1.5 spacers (50 inches wide)
Swingarm: +2 chrome lonestar racing
Steering Stem: Warrior
Stabilizer: PEP
Axle: banshee (47 inches wide)
Carrier: Dual row round house
Locknut: anti-fade lock nut
Hubs F|R: 03 blaster / stock
Bars: Pro taper school boy low
Throttle/Clutch Lever: 03 blaster
Grips: Pro taper
Nerfs: Raptor 660 A/C
Bumper: Blingstar iron cross
Grab Bar: SVC
Front Shocks: banshee works
Rear Shock: 400ex
Brake Lines: Speedlines
Rotors F|R: 03 blaster
Rims F|R: ITP bead-lock off set rims / DWT red label
Tires F|R: 22x7x10 RAZR 2's / 20X11X8 razrz

Body:
Frame: 2001
Plastic: Race front hood, 03 tank cover, banshee rears
Graphics|Seat Cover: Confederate flag
Number Backgrounds: N/A
Handguards: Tusk D-flex
Bar Pad: Pro taper w/ compass&watch
Fuel Tank: stock with shee petcock

Engine|Drive System:
Cylinder|Head: Wildcard aggressive trail port and head mod
Bore & Stroke: stock
Displacement: 195cc
Reeds: VF3
Carburetor: 34mm pj
Air Filter|Box: CFM airbox with uni clamp on filter
Pipe|Silencer: Dyno-port high volume
Clutch|Plates: Tusk
Gearing F|R: 14t|stock
CDI|Killswitch: Pro amour tether kill switch
Cooling: Djack air scoops
Other: GSXR rear caliper set up by AWK08 w/ shee master and pedal by me, Tusk gas cap, go pro camera mounts on handle bars and bumper

 

[71dodge]

worth a try!

A Arms: stock (painted)
Swingarm: N/a (not on the bike)
Steering Stem: stock
Stabilizer: none
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock hydros
Bars: pro taper 7/8 high
Throttle/Clutch Lever: MSR mx clutch lever (stock throttle
Grips: spider grips
Nerfs: none
Bumper: stock
Grab Bar: none
Front Shocks: stock (shock wear evolution tiwisted shock covers)
Rear Shock: stock (shock wear evolution tiwisted shock covers)
Brake Lines: stock
Rotors F|R: stock
Rims F|R: ITP T-9's all around
Tires F|R: maxxis razrs all around

Body:

Frame: PC candy purple blaze
Plastic: black maiyers
Graphics|Seat Cover: stock (have a custom one on the way)
Number Backgrounds: none
Handguards: none
Bar Pad: pro taper
Fuel Tank: stock

Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: .20 over
Displacement: 198cc
Cam: haha a cam
Carburetor: stock
Air Filter|Box: stock lid removed
Pipe|Silencer: stock
Clutch|Plates: stock
Gearing F|R: stock
CDI|Killswitch: stock
Cooling: stock
Other: a few polished parts

i know its half a bike but its worth a try

 

[DirtDiggler]

Chassis | Suspension | Controls:

A Arms: Stock ( ASR +3+1 Long Travel A Arms on the Way )
Swingarm: Swingarm Shop +4 Black Powdercoated
Steering Stem: Stock
Stabilizer: N/A
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Stock
Throttle/Clutch Lever: Twist Throttle / MSR Clutch Lever
Grips: Death Grips
Nerfs: Blanshee' Mans old ones I:I
Bumper: Rampage
Grab Bar: Stock
Front Shocks: Stock ( Have 450R fronts for the new a arms )
Rear Shock: 450R w/ Oconnor shock bushings
Brake Lines: Speedlinez
Rotors F|R: Front Disc Conversion
Rims F|R: Stock
Tires F|R: Stock Fronts / Paddles

Body:

Frame: Stock
Plastic: Stock Painted Krylon Fusion Patriot Blue
Graphics|Seat Cover: Stock/ Went sticker crazy and I like it
Number Backgrounds: None
Handguards: Nah
Bar Pad: Renthal
Fuel Tank: Stock

Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: Stock
Cam:
Carburetor: Stock Mikuni
Air Filter|Box: Uni pod filter w/outerwears
Pipe|Silencer: FMF Fatty / Powercore2 silencer
Clutch|Plates: Stock
Gearing F|R: 13/40
CDI|Killswitch: Stock
Cooling: Homemade air shrouds
Other: I'm still working on her , she's gettin better all the time !!!!

 

[yb200]

Chassis | Suspension | Controls:

1. A Arms:stock
2. Swingarm:R&D +4 custum swingarm
3. Steering Stem:stock
4. Stabilizer:na
5. Axle:banshee
6. Carrier:stock
7. Locknut:aftermarket locking axle nut
8. Hubs F|R:stock
9. Bars:tag x5
10. Throttle/Clutch Lever:stock
11. Grips:scott
12. Nerfs:graydon proline
13. Bumper: D G
14. Grab Bar R M
15. Front Shocks:banshee
16. Rear Shock:400ex
17. Brake Lines:stock front, hydro rear
18. Rotors F|R:stock
19. Rims F|R:douglas
20. Tires F|R:maxxis razrs


Body:

1. Frame:custom painted yellow
2. Plastic:maier race front stock rears
3. Graphics|Seat Cover:
4. Number Backgrounds:K&K #800
5. Handguards: na
6. Bar Pad:tag
7. Fuel Tank:stock


Engine|Drive System:

1. Cylinder|Head:kennedy power ported cylinder and redesigned head
2. Bore & Stroke:30 over bore stock stroke
3. Displacement:
4. Cam:a big one lol
5. Carburetor:34mm pj
6. Air Filter|Box:uni pod
7. Pipe|Silencer:shearer
8. Clutch|Plates:kennedy HD clutch kit
9. Gearing F|R:13/40
10. CDI|Killswitch:tether kill
11. Cooling:
12. Other:gsxr hydro rear,custom see thru stator cover with etched yamaha logo and led back lit, lots of custom work just check out the pics

 

[Blonder Blaster]

1.A Arms: Stock
2.Swingarm: Stock
3.Steering Stem: Stock
4.Stabilizer: NA
5.Axle: Stock
6.Carrier: Banshee
7.Locknut: Stock
8.Hubs F|R: Stock , Banshee
9.Bars: Renthal
10.Throttle/Clutch Lever: CR 250 Clutch lever
11.Grips: Composite
12.Nerfs: AC I think
13.Bumper: Aftermarket
14.Grab Bar: AC
15.Front Shocks: Banshee
16.Rear Shock: 400 EX with OConnor bushings
17.Brake Lines: Blaster / Banshee Rear
18.Rotors F|R: Blaster/ Banshee rear hydros
19.Rims F|R: Banshee SS Mag wheels
20.Tires F|R: Stock / Maxis

Body:
1.Frame: Stock
2.Plastic: Stock
3.Graphics|Seat Cover: Skulls
4.Number Backgrounds: NA
5.Handguards: NA
6.Bar Pad: Renthal
7.Fuel Tank: Stock

Engine|Drive System:
1.Cylinder|Head: Ken OConnor Racing Built Mac Dizzy exact replica
2.Bore & Stroke: Stock
3.Displacement: Stock
4.Cam: NA
5.Carburetor: 34 mm Mikuni flat slide
6.Air Filter|Box: K and N
7.Pipe|Silencer: FMF
8.Clutch|Plates: Vito's
9.Gearing F|R: 13 / 40
10.CDI|Killswitch: Stock
11.Cooling: Air
12.Other: Ken OConnor Racing polished clutch cover and oil pump cover, oil pump block off.

 

[Ranger87]

Chassis | Suspension | Controls:

1. A Arms:Stock
2. Swingarm:Stock
3. Steering Stem:Stock
4. Stabilizer:Stock
5. Axle:Stock
6. Carrier:Stock
7. Locknut:Stock
9.Bars: Pro Taper
8. Hubs F|R:Stock
10. Throttle/Clutch Lever:Stock/ Motion Pro
11. Gripsro Taper
12. Nerfs:TUSK not pictured
13. BumperG/ Not pictured
14. Grab Bar:Stock
15. Front Shocks:Stock
16. Rear Shock:Stock
17. Brake Lines:Stock
18. Rotors F|R:Stock
19. Rims F|R:Stock
20. Tires F|R:Stock


Body:

1. Frame:Stock
2. Plastic:Custom Paint
3. Graphics|Seat Cover:Monster Graphics/ Stock
4. Number Backgrounds:NA
5. Handguards: NA
6. Bar Padro taper
7. Fuel Tank:stock


Engine|Drive System:

1. Cylinder|Head:Stock
2. Bore & Stroke:Stock
3. Displacement:198cc
4. Cam:stock
5. Carburetor:stock
6. Air Filter|Box:UNI/stock
7. Pipe|Silencer:FMF Fatty. PowercoreII
8. Clutch|Plates:Stock
9. Gearing F|R:13/40
10. CDI|Killswitch:stock
11. Cooling:AIR
12. Other:

 

[blasterdemon7]

Chassis | Suspension | Controls:

A Arms: STOCK
Swingarm: STOCK
Steering Stem:STOCK WITH BILLET BAR CLAMP
Stabilizer:N/A
Axle:STOCK
Carrier:STOCK
Locknut:STOCK
Hubs F|R:BANSHEE/STOCK
Bars:STOCK
Throttle/Clutch Lever:STOCK WITH POLISHED CAP/STOCK
Grips:STOCK
Nerfs:N/A
BumperG
Grab Bar:STOCK
Front Shocks:STOCK
Rear Shock:STOCK
Brake Lines:STOCK
Rotors F|R:BANSHEE/STOCK
Rims F|R:STOCK/STOCK
Tires F|R:STOCK/DURO FLAT TRACK 18"

Body:

Frame:STOCK 2000
Plastic:STOCK 2000
Graphics|Seat Cover:STOCK
Number Backgrounds:N/A
Handguards:N/A
Bar Pad:MOOSE
Fuel Tank:STOCK WITH CUSTOM BILLET CAP
Engine|Drive System:

Cylinder|Head:STOCK/STOCK
Bore & Stroke:40 OVER/STOCK
Displacement:40 OVER STOCK
Cam:V3
Carburetor:OKO 30 MM FLAT SLIDE
Air Filter|Box:UNI/STOCK WITH NO LID
Pipe|Silencer:FMF GOLD/DG
Clutch|Plates:STOCK/STOCK
Gearing F|R:14/40
CDI|Killswitch:STOCK/STOCK
Cooling:AIR
Other:BILLET CLUTCH MASTER CYLINDER CAP,V3 REEDS,ALLEN HEAD SIDE COVER BOLTS,BILLET BLUE VALVE STEM CAPS.BANSHEE FRONT BRAKES ARE NOT INSTALLED YET.PRIMARY DRIVE GOLD X RING CHAIN.VITO CARB CABLE,MOTION PRO CLUTCH CABLE.

 

[Drifz1]

MY 01 BLASTY

Chassis | Suspension | Controls:
A Arms:stock
Swingarm:stock
Steering Stem:stock
Stabilizer:stock
Axle:widended!
Carrier:stock
Locknut:stock
Hubs F|R:stock
Bars:stocj
Throttle/Clutch Lever:stock
Grips:stock
Nerfs:Jardine!
Bumper:stock
Grab Bar:custom made
Front Shocks:stock
Rear Shock:stock
Brake Lines:stock
Rotors F|R:stock
Rims F|R:stock
Tires F|R:kenda klaw mxr's

Body: stock
Frame:stock,silver
Plastic:stock
Graphics|Seat Cover:stock
Number Backgrounds:
Handguards: none
Bar Pad:red
Fuel Tank:stock

Engine|Drive System:
Cylinder|Head:bored .10 over!
Bore & Stroke:.10
Displacement:
Cam:stock
Carburetor:stock
Air Filter|Box:removed lid
Pipe|Silencer:stock,sprayed matalic silver
Clutch|Platesro motion cable!
Gearing F|R:stock
CDI|Killswitch:stock
Cooling:stock
Otheril block off kit

]

 

[79 bronco]

Chassis | Suspension | Controls:

1. A Arms: Stock with RPM skid plates
2. Swingarm: 4 1/2 JTM products extension & Custom Skid plate
3. Steering stem: Stock with Tusk handlebar riser kit
4. Stabilizer: N/A
5. Axle: Stock
6. Carrier: Stock
7. Locknut: Stock
8. Hubs: F/R: Banshee/Stock
9. Bars: Stock
10. Throttle/Clutch lever: Stock/Banshee
11. Grips: ?
12. Nerfs: N/A
13. Bumper: RPM products Baja Bumper
14. Grab Bar: RPM products 6-pack rack
15. Front Shocks: Works SRS Dual Rate with Rez
16. Rear Shocks: Works Ultracross with Rez
17. Brake Lines: Rear Breaided stainless line/front banshee
18. Rotors F/R: Banshee
19. Rims F/R: Douglas .190
20. Tires F/R; Kenda Rront Max 22x8x10/ Maxxis All Trak 22x11x10

Body:
1. Frame: Stock with custom skid plate
2. Plastic: Maier custom banshee rear fender
Maier Blaster racing fromt fender
Maier 450 vented hood
Maier 400ex front fender extensions
3. Graphics/Seat cover: N/A / Black
4. Number Backgrounds: N/A
5. Handguards: N/A
6. Bar Pad: Renthail
7. Fuel Tank: Stock

Engine|Drive System:
1.Cylinder|Head: CT Sonic 240
2.Bore & Stroke: CT 240 / Stock
3.Displacement: CT 240
4.Cam: N/A
5.Carburetor: Keihin 36 PWK & 250r V-force 3 reed assembly
6.Air Filter|Box: K&N | Custom Alum & Outerwears air box cover
7.Pipe|Silencer: CT/CT
8.Clutch|Plates: Barnett Dirt digger
9.Gearing F|R: 14/40
10.CDI|Killswitch: Stock
11.Cooling: AIR
12.Outher: Custom Dual head lights & mount
Custom Alum rear wheel spacers
Custom Alum air box
Custom frame guards
Front wheel spacers
Vitos oil injection block off
Modquad rear Alum brake reservoir & cap
Tusk polished folding shift lever
T.M. Designworks no leak alloy pipe collar