Jetting and Reeds

[Ak2stroke]

I have searched this forum high and low and can find an answer.
I have an 05 blaster pretty stock 14/40 gearing.
I found a set of vito's carbon reeds can I used them on my wheeler with out any other mods or what other mods should I do I'm just looking for a little more low end torque and throttle response. I am looking into jetting does any one have any ideas for a good setup for a stock pipe.

Again thanks for any and all info

 

[Awk08]

stock jetting with a stock pipe, i ran boysen carbon reeds on my old stock 96 without any jetting changes, they really don't do much but open quicker ???
it'll feel snappier, but they don't increase flow enuf to worry about
at best, i'd check to make sure theres a 240 main, maybe a 250 if you go after market filter/lid off and your elevation is low ???

 

[bagds101]

if you want more low end, i would recommend replacing the stock exhaust, but awk knows his sh*t so listen to him

 

[roadkill]

isnt there a better jetting for a stock bike, that lrd suggested or something?