Warrior, raptors, Banshee, yfz all the same spline. If you find some stock yfz 450r hubs they have a little extra offset, don't remember how much. Only set on flea bay right now don't look right.
You will need a gear puller(If there not wore out).And when installing the new or used banshee hubs I would make sure they go on using a rubber mallet.I use some locktight on the threads as well.Ebay has the best deals but Id be skeptical about used hubs.You may be able to get some durablue or something for about 150 rather than a used good set for about 70ish.You just never know what your getting when it comes to a part like this.If its loose the parts down the rd are going to cost you.