how to make a custom bumber

[hayner41]

-remove the little black peice that says yamaha on the top of the bumper

-drill four holes on the top(and bottom if you want on the bottom to)
-also make sure you hol the diamond plate in place(or metal of choice)

-using four self taping metal screws screw the piece in place

 

[crusty4365]

awsome diy thanks

 

[hayner41]

if anyone uses this mod take some pictures!

i wanna see how yours turn out!

 

[regal81455]

Ill be doing something similar soon as Im about to begin building blasty #2 for the wifey!! stay tuned ive got some good ideas!

 

[hayner41]

alright sweet

 

[blasterfreek30]

i had the same diamond plate on the bottom like urs, before i got the dg bumper, nice job man!

 

[ftl900]

I love it, but where did you get the diamond plate??

 

[hayner41]

go ask a hard ware store or sheet metal place that is what i did

 

[ftl900]

OK, today I went to Lowes, Home Depot, and 2 Ace hardware stores. No diamond plate. I'm thinking it's gonna be ebay for me.

 

[retrosns]

Find a scrap metal purchaser..you can usually buy metal for what they pay out for it

 

[kylepotatoes]

How did you bend it?

 

[ruthless_one3k]

Put it in a vice and pull on it, that works for me.

 

[bkg479]

Dude go to a scrap yard, they have tons of sheet metal, you could probably find somthin like that.

 

[budzagreen]

scrap yard or buy a used beat up truck tool box. bought one for 25 and customized 2 golf carts and still have alot of it left.

 

[roostinblaster]

we just made a front bumper for mine used one of the big shop fans but makes the nose too long so i was thinking about taking the dimond plate across the top sides and bottom but yea you can get it from lowse i saw it there the other day when i was going to buy plate steel for my front motor mounts and thought about it