Ok so i think on everyones blasters the plastic heel guards from the plastics to the back of the pegs are all broken. Has anyone made something to replace them?
Heel Guards??
- Thread starter jyamaharider713
- Start date
yep, raptor or yfz heelgaurds, may require a small bracket to connect to frame, bolt right up to our footpegs
http://www.ebay.com/itm/04-13-Yamah...Parts_Accessories&hash=item2a46445ef9&vxp=mtr
http://www.ebay.com/itm/04-13-Yamah...Parts_Accessories&hash=item2a46445ef9&vxp=mtr
If you are creative, you can use the existing brackets. Remove and re-bend the top one that bolts to the frame.
Bend slowly and carefully, the metal these are made of can only take so much bending and twisting. I broke one on the first try , luckily I had a tube I used for a coupling and repaired with JB Weld epoxy. I also had to trim them to fit my nerf bars. The kick starter side you will need to bend the brackets on this side more to allow room for kick starting. I do not have complete clearance for my riding boots but I have learned to place my heel on the front side of the kick starter and no longer have issues.
I prefer these heel guards over more expensive smaller metal ones and nylon ones. They keep allot of mud off the back of your legs and boots but still allow water through to flush the mud out.
Bend slowly and carefully, the metal these are made of can only take so much bending and twisting. I broke one on the first try , luckily I had a tube I used for a coupling and repaired with JB Weld epoxy. I also had to trim them to fit my nerf bars. The kick starter side you will need to bend the brackets on this side more to allow room for kick starting. I do not have complete clearance for my riding boots but I have learned to place my heel on the front side of the kick starter and no longer have issues.
I prefer these heel guards over more expensive smaller metal ones and nylon ones. They keep allot of mud off the back of your legs and boots but still allow water through to flush the mud out.
I know this is late, but....I "believe" raptor 660 heel guards bolt directly up, no modifications needed...
Similar threads
